Products

Technical Specifications Material Thickness Range: 0.15–2.0 mm Arbor Diameter: 160 mm Drive System: Arbor Motor: 30 kW Rewinding Motor: 75 kW Max. Line Speed: 200 m/min Key Features ◉ Precision Slitting: Tolerance ±0.05 mm (for thickness ≤0.5 mm) ◉ High-Rigidity Arbor: Ø160 mm shaft with zero-clearance tooling seats ◉ Dynamic Tension Control: Dual-motor synchronization for stable winding ◉ Speed-Optimized Design: 200 m/min capability for high-volume production Terminology High-Speed Slitting: Precision longitudinal cutting at industrial velocities (≥150 m/min). Arbor Assembly: Rotating shaft system holding cutting blades (critical diameter = 160 mm). Rewinding System: Tension-controlled coiling mechanism (75 kW motor capacity). Configuration: Uncoiler → Precision Guides → 160mm Tooling Arbor → Tension Measurement → Dual-Drum Rewinder

For Sale: 95% New Jiangsu Yawei 0.3-3.0×1850mm Slitting Line Condition: Near-new with complete spare parts Key Specifications Slitting Width: 1850 mm Thickness Range: 0.3–3.0 mm Inclusions: Full tooling set + critical spare components Terminology Clarification Wide-Format Slitting Line: Industrial system for precision longitudinal cutting of oversized coils (1850mm capability). 95% New Condition: Minimal-production-hour equipment with intact factory calibration. Turnkey Spares Package: Blades, spacers, sensors, and wear parts for uninterrupted operation. Feature Highlights ◉ High-Precision Tooling: Tolerance ±0.1mm across full 1850mm width ◉ Heavy-Duty Construction: Optimized for 3.0mm stainless/carbon steel ◉ Production-Ready: Installed with OEM-approved wear components ◉ Rapid Deployment: Pre-commissioned for plug-and-play operation *Typical Applications: Stainless steel cold-rolled strips Silicon steel transformer cores Aluminum alloy precision slitting*

System Configuration Coiling System Rewinder: Ø610mm mandrel Drive: 200 kW motor Material Handling: Hydraulic lifting trolley Tension & Feeding Platform 3-Roll Tension Unit 2-Roll Entry Guides Plate-type Tensioner Pre-slitting Guides + Anti-skip Hold-down Rolls Bridge Unit Overlap Bridge + Scrap Chopper Edge Processing Dual Independent Edge Trimmers (2 units) Cutting System Arbor: Ø260mm shaft Drive: 132 kW motor Guiding System Electric Single-side Manual Guides Anti-skip Hold-down Rolls Entry Section 2-Roll Pinch Feed 5-Roll Leveler Hydraulic Crop Shear Drive: 11 kW motor Uncoiler Type: Double-cone expandable mandrel Capacity: 36-ton coils Handling: Hydraulic lifting trolley Hydraulic System Solenoid Valves (Huade Brand) Air-cooled Power Unit Control System New Eurotherm 590 DC Drive

The Danieli Hot Rolling Mill delivers premium precision for wide plates (600–1,500mm) with Industry 4.0-ready QSP technology, IoT remote monitoring, and adaptive cooling. Ideal for aerospace, energy, and defense sectors.

This refurbished 20 hi cold rolling mill achieves ±0.01mm precision on 0.20mm foils at 360 m/min, combining second hand 20 hi reversible CRM technology with modern controls for aerospace-grade materials at 60% cost savings versus new installations.

This revamped Sundwig 20-Hi foil rolling machine produces 0.01mm precision foils at 500 m/min, featuring Secondhand 20 hi Reversible Cold Rolling technology with new AGC/X-ray controls for aerospace-grade alloys at 70% cost savings versus new mills."

This refurbished 750 4 Hi Mill delivers ±0.5μm precision with Secondhand AGC Cold Rolling technology at 60% cost savings, processing stainless/aluminum down to 0.25mm thickness for automotive/electronics applications.

6 hi cold rolling mill achieves ±0.01mm precision on ultra-thin 0.20mm steel while the heavy-duty 1150 rolling mill processes 200mm slabs at 15,000kN force – delivering 30% faster production with Industry 4.0 analytics and guaranteed <24-month ROI.

Technical Parameters Material Processed: 201 Stainless Steel Rolling Speed: 160 m/min Motor System: Brand: Hengli Configuration: 1 × 750 kW (Main Drive) 2 × 380 kW (Auxiliary Drives) Gearbox: Models: 710 (1 unit), 500 (2 units) Ratio: 1:16 (710), 1:14 (500) Roll Dimensions: Work Rolls: Ø780 mm × 1600 mm (body) Backup Rolls: Ø750 mm × 650 mm (body) Material Specifications: Max. Entry Thickness: 3.0 mm Min. Finished Thickness: 0.48 mm Strip Width: 680 mm Coiling System: Solid Mandrel Winding Control System: Eurotherm "590" DC Drive Total Weight: 130 Tons Terminology Clarification 201 Stainless Steel: Austenitic chrome-manganese steel for cost-effective corrosion resistance. Solid Mandrel: Non-expanding shaft for rigid coil core support during winding. Gearbox Ratio: Input/output speed reduction ratio (e.g., 1:16 = output speed 1/16th of input). Eurotherm "590": Industry-standard DC drive for precision speed/torque regulation. Key Features ◉ Optimized for 201 Stainless: Precision thickness reduction to 0.48 mm ◉ High-Torque Transmission: Multi-stage gearboxes (710/500 models) ◉ Rigid Coiling: Solid mandrel design for tension stability ◉ Proven Control System: Eurotherm 590 ensures dynamic speed accuracy

Equipment Status Location: Hebei, China (dismantled) Year Commissioned: 2016 Year Decommissioned: 2023 Brand: china mcc5 Process Parameters ParameterSpecification MaterialQuality Carbon Steel Max. Rolling Speed300 m/min Strip Width Range100–450 mm Max. Entry Thickness5.0 mm Min. Finished Thickness0.11 mm Drive System Main Motor: Power: 770 kW × [Qty unspecified] Recoiler Motor: Power: 355 kW × [Qty unspecified] Roll Stack Configuration Work Rolls: Ø120 mm × 500 mm (body) Backup Rolls: Ø460 mm × 460 mm (body) Intermediate Rolls: Ø190 mm × 500 mm (body) Control & Instrumentation Control System: Siemens (Complete) Gauge Control: AGC (Automatic Gauge Control) Thickness Measurement: Tsinghua University Laser Gauge Auxiliary Specifications Gearbox: Model/Ratio not specified Mill Housing: Dimensions not specified Coiling Method: Not specified Total Weight: ≈75 tons Terminology Clarification Quality Carbon Steel: Low/medium-carbon steel grades (e.g., SAE 1008-1045). AGC: Closed-loop system dynamically adjusting roll gap for micron-level thickness accuracy. Tsinghua Thickness Gauge: Non-contact laser/X-ray sensor for real-time strip profiling (±0.5μm precision). Dismantled Status: Equipment disassembled for relocation; structural integrity verified. Performance Notes ◉ Ultra-Thin Rolling Capability: Verified 0.11 mm output thickness (tolerance ±0.002 mm) ◉ Precision Architecture: Intermediate rolls (Ø190×500 mm) for enhanced flatness control ◉ Siemens Automation: Full digital drive system (likely SIMATIC TDC platform) ◉ Narrow-Strip Optimized: 100–450 mm width range for specialty steel products Potential Applications: Precision shim stock Tool steel temper rolling Electronic component substrates