Cold Rolling Mills

This is a used 4-Hi reversible cold rolling mill manufactured in 2012, capable of rolling down to 0.18mm in practice, equipped with Siemens electrical control and AGC system, and comes with abundant spare parts including 32 new work rolls.

This is a used 4-Hi 750mm cold rolling mill manufactured in 2010 and stopped production in 2026, designed for stainless steel 201, with max width 690mm, min thickness 0.24mm, rolling speed 200m/min, main motor 750kW, electric control system by Eurotherm, housing column cross-section Φ450×380mm, and backup roller size Φ620×700mm.

This is a used 4-Hi 750mm cold rolling mill manufactured in 2010 and stopped production in 2026, designed for stainless steel 201, with max width 690mm, min thickness 0.24mm, and rolling speed 200m/min.

This is a 20-high 1150mm cold rolling mill manufactured by Henan Tailong in 2014, with major components (electric controls, motor, gearbox) replaced in 2018. It is equipped with a 1500kW main motor, and both the recoiler and uncoiler are also 1500kW each. The mill has a maximum designed rolling width of 1050mm, a maximum inlet thickness of 3.0mm, and can produce a minimum finished thickness of 0.07mm at a rolling speed of 800 m/min. It features an AGC screw-down system with a maximum rolling force of 3500kN and uses a collapsible drum for coiling. The electrical control system, supplied by Schneider and Inovance, is in good condition. The equipment ceased production in December 2025 and has an annual capacity of approximately 0.18–0.36 million tons, suitable for rolling mild steel (MS).

This is a 4-high 1150mm cold rolling mill manufactured by Wuxi Jingcheng. It is equipped with a 1250kW main motor (350/1000 rpm), a 900kW recoiling motor (400/1200 rpm), and a 750kW uncoiling motor (400/1200 rpm). The mill has a maximum designed rolling width of 1050mm, with an actual maximum inlet thickness of 4.0mm and a practical minimum finished thickness of 0.2mm, at a rolling speed of 260 m/min. It features an AGC screw-down system with a maximum rolling force of 1,500 tons. The electrical control system is in good condition, and a comprehensive set of spare parts is included, such as backup rolls, work rolls, bearings, heaters, etc. The equipment is still in operation and disassembly/refurbishment services are available upon request.

This is a 20-high 1150mm cold rolling mill manufactured by CFHI in 2018. It is equipped with a 1500kW main motor, and both the recoiler and uncoiler are also powered by 1500kW motors each. The mill has a maximum designed rolling width of 1050mm, a maximum inlet thickness of 3.0mm, and can produce a minimum finished thickness of 0.07mm at a rolling speed of 800m/min. It features an AGC screw-down system with a maximum rolling force of 3500kN and uses a collapsible drum for coiling. The electrical control system, supplied by Schneider and Inovance, is in good condition. The equipment ceased production in December 2025 and has an annual capacity of approximately 0.18–0.36 million tons, suitable for rolling mild steel (MS).

This 1450mm 6-Hi cold rolling mill features AGC hydraulic screw-down, Siemens electric control, and high-power main & coiler/uncoiler motors (1350kW×2 each), enabling high-precision rolling with a max width of 1300mm and a min finished thickness of 0.2mm.

This 4-Stand 850mm Tandem Cold Rolling Mill, manufactured in 2013 by Beijing Antai, features a unique hybrid configuration: Stand 1 is 4-high, while Stands 2-4 are 6-high for superior shape control. With 900kW motors per stand (3,600kW total), hydraulic AGC, and 360 m/min rolling speed, it reduces strips from 3.0mm to 0.3mm at 750mm width. Production ceased in 2025 – very recently operated. Includes spare parts for one operational set plus one complete standby stand. Electrical system needs replacement. Full services available.

This 4-Stand 4-Hi 850mm Tandem Cold Rolling Mill, manufactured in 2013 by Wuxi Dalishen, is a modern continuous mill for mild steel. The 4-stand tandem configuration enables single-pass reduction down to 0.6mm finished thickness. Each stand features 1000kW main motors (5,000kW total), hydraulic AGC, 750 tons rolling force, 750mm width capacity, and 300 m/min rolling speed. Production ceased in 2015, indicating low operating hours. Mechanical equipment is complete, including a 50-ton spare parts package. Electrical control system needs replacement. Full disassembly, refurbishment, and installation services available.

This 900mm 6-Hi Cold Rolling Mill, manufactured in 2012, is a well-maintained reversing mill designed for precision cold rolling of mild steel strips. Featuring a 6-high roll configuration, it delivers exceptional rigidity and shape control for producing high-quality finished products. The mill is powered by two 800kW main motors, with additional two 800kW coiler motors, enabling rolling speeds up to 400 m/min. Capable of reducing strips down to 0.15mm minimum thickness with actual production widths up to 820mm, this mill is ideal for medium-width precision cold rolling applications. The complete package includes the main mill stand, coilers, and electrical control system, all reported to be in good condition. Available with comprehensive disassembly, refurbishment, and installation services from a trusted metallurgical solution provider.

This 4-stand 4-Hi Cold Rolling Mill, featuring a robust 4-stand configuration, offers an efficient and proven solution for medium-width cold rolling production. Manufactured with a solid mill housing and powered by a 900kW main motor, it is designed for consistent and reliable performance. Capable of rolling materials from 4.5mm down to 0.3mm at speeds up to 260 m/min, this complete line includes all necessary components and is supported by a supplier offering full disassembly, refurbishment, and installation services, ensuring a smooth path to renewed production.

This well-maintained 6-Hi 1450mm Cold Rolling Mill, manufactured in 2009, offers a reliable and efficient solution for producing high-quality cold-rolled steel. Equipped with a Siemens electric control system and AGC screw-down, it is designed for precision and performance. Capable of rolling low alloy structural steel from 4.0mm down to 0.25mm at speeds up to 1000 m/min, this mill represents a complete metallurgical solution from a trusted used equipment provider, ready for disassembly, refurbishment, and installation services.