Cold Rolling Mill

This is a used 4-Hi reversible cold rolling mill manufactured in 2012, capable of rolling down to 0.18mm in practice, equipped with Siemens electrical control and AGC system, and comes with abundant spare parts including 32 new work rolls.

This is a used 4-Hi 750mm cold rolling mill manufactured in 2010 and stopped production in 2026, designed for stainless steel 201, with max width 690mm, min thickness 0.24mm, rolling speed 200m/min, main motor 750kW, electric control system by Eurotherm, housing column cross-section Φ450×380mm, and backup roller size Φ620×700mm.

This is a used 4-Hi 750mm cold rolling mill manufactured in 2010 and stopped production in 2026, designed for stainless steel 201, with max width 690mm, min thickness 0.24mm, and rolling speed 200m/min.

This is a 4-high 1150mm cold rolling mill manufactured by Wuxi Jingcheng. It is equipped with a 1250kW main motor (350/1000 rpm), a 900kW recoiling motor (400/1200 rpm), and a 750kW uncoiling motor (400/1200 rpm). The mill has a maximum designed rolling width of 1050mm, with an actual maximum inlet thickness of 4.0mm and a practical minimum finished thickness of 0.2mm, at a rolling speed of 260 m/min. It features an AGC screw-down system with a maximum rolling force of 1,500 tons. The electrical control system is in good condition, and a comprehensive set of spare parts is included, such as backup rolls, work rolls, bearings, heaters, etc. The equipment is still in operation and disassembly/refurbishment services are available upon request.

This is a 20-high 1150mm cold rolling mill manufactured by CFHI in 2018. It is equipped with a 1500kW main motor, and both the recoiler and uncoiler are also powered by 1500kW motors each. The mill has a maximum designed rolling width of 1050mm, a maximum inlet thickness of 3.0mm, and can produce a minimum finished thickness of 0.07mm at a rolling speed of 800m/min. It features an AGC screw-down system with a maximum rolling force of 3500kN and uses a collapsible drum for coiling. The electrical control system, supplied by Schneider and Inovance, is in good condition. The equipment ceased production in December 2025 and has an annual capacity of approximately 0.18–0.36 million tons, suitable for rolling mild steel (MS).

This 1450mm 6-Hi cold rolling mill features AGC hydraulic screw-down, Siemens electric control, and high-power main & coiler/uncoiler motors (1350kW×2 each), enabling high-precision rolling with a max width of 1300mm and a min finished thickness of 0.2mm.

This 4-Stand 4-Hi 850mm Tandem Cold Rolling Mill, manufactured in 2013 by Wuxi Dalishen, is a modern continuous mill for mild steel. The 4-stand tandem configuration enables single-pass reduction down to 0.6mm finished thickness. Each stand features 1000kW main motors (5,000kW total), hydraulic AGC, 750 tons rolling force, 750mm width capacity, and 300 m/min rolling speed. Production ceased in 2015, indicating low operating hours. Mechanical equipment is complete, including a 50-ton spare parts package. Electrical control system needs replacement. Full disassembly, refurbishment, and installation services available.

This 900mm 6-Hi Cold Rolling Mill, manufactured in 2012, is a well-maintained reversing mill designed for precision cold rolling of mild steel strips. Featuring a 6-high roll configuration, it delivers exceptional rigidity and shape control for producing high-quality finished products. The mill is powered by two 800kW main motors, with additional two 800kW coiler motors, enabling rolling speeds up to 400 m/min. Capable of reducing strips down to 0.15mm minimum thickness with actual production widths up to 820mm, this mill is ideal for medium-width precision cold rolling applications. The complete package includes the main mill stand, coilers, and electrical control system, all reported to be in good condition. Available with comprehensive disassembly, refurbishment, and installation services from a trusted metallurgical solution provider.

This well-maintained 6-Hi 1450mm Cold Rolling Mill, manufactured in 2009, offers a reliable and efficient solution for producing high-quality cold-rolled steel. Equipped with a Siemens electric control system and AGC screw-down, it is designed for precision and performance. Capable of rolling low alloy structural steel from 4.0mm down to 0.25mm at speeds up to 1000 m/min, this mill represents a complete metallurgical solution from a trusted used equipment provider, ready for disassembly, refurbishment, and installation services.

This 1200mm 20-high cold rolling mill, manufactured in 2006 and shut down in 2018, features AGC screw-down system, collapsible reels, and is capable of rolling stainless steel down to 0.1mm thickness at speeds up to 780 m/min.

This high-performance 6-Hi 1100mm cold rolling mill features AGC precision control, proven capability for wide SPTE strips, and includes comprehensive refurbishment services, offering a total solution for your production needs.

This high-performance 6-Hi 1100mm cold rolling mill features AGC precision control, proven capability for wide SPTE strips, and includes comprehensive refurbishment services, offering a total solution for your production needs.